Smart Products Announces the Following New ACT Homepro RF Zwave Products
The new ZTW100 Transmitter controls on/off and dimming of up to 15 Zwave enabled modules and provides automatic repeater function of commands between Homepro Modules, as well as ensures complete home coverage. Works with Wireless controller (ZTH100 or with USB Device ZCU000).
The ZRW100-3 3-Way master Wall Switch replaces the existing wall switch and provides a repeater function. It install in place of 3-way switches to provide remote control of lighting. Works with Wireless Controller (ZTH100) or USB Device (ZCU000).
AS101 Three Way Slave replaces an existing wall switch and works with ZRW100-3 for 3-way lighting applications. Works with wireless Controller( ZTH100) and USB
Device (ZCU000)
The ZDW120 Two Wire wall switch Dimmer, rated for 600 Watts, replaces the existing wall switch and features an Automatic Repeater Function. Works with Wireless controller (ZTH100) and USB Device (ZCU000).
For more information on ACT 's HomePro RF products based on Zwave technology, please call Tom Lenahan at 201-594-0550 or visit our website at www.act-solutions.com Homepro RF section.
Check off #126 on your ONLINE READER SERVICE CARD to receive more information about this article. (need an Online Reader Service Card? Click here .)
Greenlee’s Multi-Function Electrical Testers are Industry’s First Category IV 1000 Volt Rated
Greenlee's GT-540 and GT-220 multifunction electrical testers are the industry's first to attain a safety category rating of Category IV 1000V. The GT-540 
and GT-220 were independently tested according to UL 61010B-1 and IEC 61010-1. The GT-540 and GT-220 feature auto selection mode that allows the electrician to measure AC/DC voltage in low impedance mode, resistance and continuity. These testers are designed to provide the electrician with the ultimate in safety, performance, and comfort in commercial, industrial, utility and residential applications. The GT-540 provides additional measurement capabilities such as low impedance and high impedance AC/DC voltage, capacitance, diode checks, and low-ohms fast continuity mode. Both testers have an automatic selection mode to measure AD/DC voltage, resistance, continuity and AC amperage with the touch of one button. There is also a data hold feature to capture important readings. Other features include a low battery indicator and an automatic power off for long battery life. Greenlee also offers a lifetime, limited warranty with these testers. For more information on the GT-540 and GT-220 electrical testers, or other test instruments from Greenlee, a Textron company, contact Greenlee at (815) 397-7070 or visit the website at www.greenlee.com.
Check off #117 on your ONLINE READER SERVICE CARD to receive more information about this article. (need an Online Reader Service Card? Click here .)
Extech Instruments Announces Combination MultiMeter Tachometer + Infrared Thermometer
The Craftsman Professional 81079 is an Extech Models EX450 Instruments introduces Model RPM10 , two a new Photo/Contact Tachometer that uniquely ergonomically designed multimeter s with built-in includes a built-in, and EX470 from its new 400 Series of MultiMeters uniquely feature non-contact I infra R -red (IR) thermometer. The IR thermometer provides fast and easy measurements ranging from -4 to 572 o F (-2 0 to 3 00 o C) . The 7 :1 field of view allows a 1 ” spot to be measured at a distance of 7 ”.
In the photo mode, RPM10 utilizes a laser light source and Model EX470 The Craftsman Professional 81079 measures 10 to 99,999 rpm from up to 6.5 ft from the target. In the contact mode, it measures from 0.5 to 20,000 rpm while linear surface speed measurements range from 0.2 to 6560 ft/min, and 0.05 to 1999.9 m/min. Measurements are accurate to 0.05% with max resolution of 0.1 rpm. Readings are displayed on a large, easy to read LCD and the memory stores the last, max, and min readings. Complete with tips and wheels for rpm or linear surface speed, four 1.5V AA batteries, reflective tape, rubber boot, and carrying case. CAT III test leads, multi-position tilt stand, Velcro strip for hanging, protective holster with test lead holder, bead wire temperature probe (except EX450 ) , and 9V battery. Model PRM10 . Dimensions: 8.5 x2.6 x1.5” (216 x66 x38 mm). For more information, visit www.extech.com, or call 1-781-890-7440.
Check off #118 on your ONLINE READER SERVICE CARD to receive more information about this article. (need an Online Reader Service Card? Click here .)
Extech Instruments Announces Non-Contact AC Voltage & Current Detector
Extech's NEW Model DVA30 detects AC voltage from 5V to 250V and AC current from 400mA at 0.2” distance and at much greater distances for 
larger current flow. Sensitivity adjustments increase or reduce sensor trigger threshold. Audible and visual indicators show the presence of current or voltage. Extech’s non-contact AC current detector is used to trace concealed wires in walls and floors, identify “hot” wires, trace current flow where voltage detection does not work (behind walls, in conduits, through concrete, or underground). The sensitivity is high enough to trip on low voltage HVAC or similar signal levels. Complete with four LR44 button batteries and pocket clip. Delivery from stock.
For the name of a local distributor log onto www.extech.com or call 1-781-890-7440.
Check off #130 on your ONLINE READER SERVICE CARD to receive more information about this article. (need an Online Reader Service Card? Click here .)
Greenlee Offers VS1 Series Gigahertz Splitters
Greenlee introduces its new VS1 series of gigahertz splitters designed for use in applications that call for increased bandwidth in a distribution system, such as digital broadcast and cable television, off-air antennas and RF distribution.
A nickel-plated zinc diecast housing with a 100 percent solder sealed tin backplate provides excellent anti-corrosive protection and EMI/RFI shielding. A single power passive port is included to accommodate remote powering applications. The printed circuit board construction ensures consistent RF performance and excellent port-to-port isolation. The precision machine threaded F-Ports allow for perfect connector fit. The F-Ports are spaced at one-inch on center to allow for application of security sleeves and winter filters to fit properly and the F-Ports comply with SCTE outdoor standards.
For more information on the VS1 Series gigahertz splitters, or other products from Greenlee, a Textron company, contact Greenlee at (815) 397-7070 or visit the website at www.greenlee.com.
Check off #121 on your ONLINE READER SERVICE CARD to receive more information about this article. (need an Online Reader Service Card? Click here .)
