AEMC Introduces Clamp-On Leakage Current Meter 
The TRMS Clamp-On Leakage Current Meter Model 565 is designed to measure low AC currents, which are typically leakage currents in ground conductors. Low currents are measured using the 60mA and 600mA ranges. Leakage current measurements up to 600mA with up to 10µA resolution, on a ground conductor or through the vector sum on multi-conductors, can be accomplished.
The Model 565 may be used as a standard clamp-on meter measuring to 100Arms, as well as measuring VAC and VDC, resistance and continuity (with a buzzer).
ll measurements are displayed on a 4-digit backlit LCD. The high sensitivity of the probe (10µA and 100µA) is possible through special jaw construction, designed to accommodate the most common conductors up to 1.1" (26mm) in diameter.
AEMC INTRODUCES LEAKAGE CURRENT PROBE
The AC Leakage Current Probe Model 2620 measures leakage current shunted to ground caused by insulation faults. It enables the operator to locate failures when they occur, or anticipate them before they occur, without shutting down equipment or spending hours troubleshooting.
It is designed specifically for locating low current faults on high current loads. The detector is a sensitive nickel alloy AC current transformer capable of measuring differential or leakage current as low as 500µA. It may also be used to measure current up to 400A continuous duty. Its 4" jaw opening facilitate both multiple and large conductors.
The Model 2620 may also be used as a highly accurate clamp-on current probe, providing a versatile way to analyze unbalanced current measurements, leakage values on grounding conductors and ground loop currents.
The Model 2620 has switch selectable ranges and is terminate with safety shrouded banana plugs on 5 ft leads, making IP compatible with most multimeters.
Amprobe ® GP-2 Ground Resistance & Resistivity Tester
The Amprobe GP-2 Ground Resistance & Resistivity Tester is designed to 
measure earth ground resistance using 3 point (fall of potential) or 2 point tests, and automatically calculates resistivity using 4 point tests. Features an automatic voltage measurement that prevents false measurements and automatically applies three testing frequencies to ensure the most accurate readings. Also includes test leads, auxiliary electrodes and software, making it the complete product solution. Additionally, it features 999 internal memory locations for storing measurements and includes auto ranging capabilities and a RS-232 download to a personal computer. For more information call 1-800-327-5060 or visit www.amprobe.com
Amprobe ® DGC-1000A Clamp-on Ground Resistance Tester
The new Amprobe DGC-1000A Clamp-on Ground Resistance tester provides accurate ground resistance measurement from 0.025 to 1500 Ohms. Features TRMS current measurement capabilities including leakage current and allows for accurate readings, regardless of power quality. It also includes a continuity beep if the resistance is lower than 40.00 Ohms. No test leads or auxiliary electrodes are necessary, making it simple and easy to use. Features a data logging capability of up to 116 records, individual data point recording technology and user selectable high & low ohm audible alarms. Also includes a low battery indicator, large LCD display and an auto power off feature. For more information call 1-800-327-5060 or visit www.amprobe.com.
New Textbook Addressing Test Instruments from American Tech
American Technical Publishers, Inc. announces a new textbook that provides a 
comprehensive view of the latest information on the safe, efficient, and practical use of electrical test instruments. Test Instruments addresses tools used for electrical equipment installation, process equipment operation, electrical power quality, and troubleshooting. Over 80 different types of test instruments are discussed as they relate to specific industrial applications ranging from testing receptacles to monitoring radiation meters.
Test Instruments begins with an introduction to safety and test instruments, and then focuses on test instruments used for specific applications found in industry. Personal protective equipment depicted is based on requirements specified in the National Fire Protection Association standard NFPA 70E, Standard for Electrical Safety in the Workplace.
Full-color illustrations and photographs are used to supplement concise text. Procedures for the various measurements are detailed with sequenced steps. Factoids, Technical Tips, and Safety Tips throughout the text complement the content presented. An extensive Glossary and comprehensive Appendix offer additional material.
For more information call 800-323-3471 or visit www.go2atp.com.
AutomationDirect Launches RHINO(TM) Line
AutomationDirect has launched the RHINO line of power supplies, which includes several new metal and plastic housed switching supply models. RHINO PSM series switching DC power supplies are available in 12 or 24 VDC adjustable output models. Innovative features of the RHINO PSM line include a redundanc module for confuring a redundant power system without additional components; a battery control module suitable for creating a DC UPS system and charging and monitoring an external battery; and a buffer module for maintaining output voltages of a 24 VDC power supply after brownouts or voltage dips of up to 200 ms for 25 Amps. Prices for PSM models start at $86.
Sammy X-Press ® Lite XP 200 System Luminaire Fitting Anchor
ITW Buildex is pleased to introduce an innovative addition to the Sammy X-Press product line, X-Press Lite (XP 200). The Sammy X-Press System is designed to provide direct attachment of threaded rod in metal deck (minimum 22 gauge) and thin gauge purlin (minimum 16 gauge), while providing reduced installation costs in terms of time and materials.
The patent-pending X-Press Anchors consist of a threaded fastener and expandable sleeve. The X-Press System features an easy-to-install anchor with expanding anchoring strips that collapse to prevent pullout after installation. The Sammy X-Press It ® Installation Tool assures a perfect installation every time offering the added convenience of one-tool efficiency – just drill and drive in seconds!
Magnaray(R) Lights Up Honolulu Parking Garage
When Kaiser Permanente Chief Engineer Garrett Oguma wanted to improve the lighting quality of his parking garage structure, while reducing energy and maintenance costs, he contacted Tom Brennan of EcoLite, in Honolulu. Tom used the Magnaray W1PL36 (45 total watts each) adjustable flood unit with clear lens.
Existing 150 watt HPS (174 total watts each) wall pakcs provided lots of glare, but not truly visible lighting (s/P ratio = .45). Many days, the lights are on 24 hours. Becuase of the existing quantity of HPS units, the Magnray #W1PL36 was the ideal choice, providing better quality lighting results (S/P ratio of lamp is 1.62). With a rebate, the savings per year for electricy and maintaining costs amounted to $30, 427.
Controlled Power Company Publishes New Brochure
Controlled Power Company www.controlledpwr.com, a worldwide manufacturer of products providing complete electrical power conditioning and protection, has published a new "Model ELN" centralized emergency lighting inverter brochure.
Available in both PDF file and hardcopy formats, this 2-page, 4/color brochure discusses and illustrates the features and benefits of the "Model ELN", and also provides product specifications, a product selection guide, as well as safety and standards compliance data.
Cooper Crouse-Hinds Speed-Mount™ Nonmetallic Switchboxes
Cooper Crouse-Hinds introduces Speed-Mount™ switchboxes. With Speed-Mount switchboxes the device or switch is quickly and easily installed by simply pressing the device mounting screw into the device hole in the box and turning the screw to lock it in place. The spring steel clip locks the screw securely in place. To remove the device, simply unscrew the screw in the traditional manner. 
Nonmetallic Speed-Mount Switchboxes require no tools to install the cable into the box and there is no need to break out knockouts. The unique conf
iguration of this quick entry feature on single gang boxes provides a self-feeding feature that eliminates the need to reach inside the box to pull the wire out.
The 2, 3 & 4 gang boxes feature a labor saving integral clamping feature. The quick entry also serves as a clamp. Each entry into the multiple gang boxes has the quick entry feature allowing the installer to simply push the cable into the box, so the cable can be inserted where it is required.
For more information or call (315) 477-5531 or visit www.cro use-hinds.com. In Canada, call (905) 507-4187.
Leviton Expands OEM Offering
Leviton Manufacturing has expanded its OEM offering with the introduction of a line of LCDI (leakage current detection interrupters) devices for room air conditioners. The new LCDI cordsets comply with UL's 484 listing requirements, which specifies that single-phase portable room air conditioners manufactured after August 1, 2004 contain either a factory installed LCDI or AFCI protection device to reduce the risk of an arc fault occurring in the air conditioner's power cord.
MGE Introduces Commercial Surge Suppression Products to Complement UPS Product Line
MGE UPS SYSTEMS INC.introduces the comprehensive Eclipse-T family of commercial transient voltage surge suppression (TVSS) equipment as a complement to its popular line of uninterruptible power supplies (UPS).
The new Eclipse-T series includes six products with single- and three-phase models offering peak capacities ranging from 100kA to 500kA in modular and non-modular panels. With high capacity service entrance, branch panel and integrated branch panel configurations, MGE addresses the widest range of requirements for various installations with these compact, yet durable systems.
All models feature an audible alarm, LED indicators, and dry contacts to notify users of system status, as well as individually fused metal-oxide varistors (MOVs). Most models also include a convenient surge counter (excluding the E-T100W) and a LightningTemp ® fuse (except “BP” models) for added reliability. SineWave Tracker™ circuitry on models below 250kA suppresses transients closer to the sine wave for improved equipment protection. Specified models are available in NEMA3R enclosures suitable for outdoor or ruggedized installations.
All models include a 10-year limited warranty and meet or exceed international standards for safety and performance.
To learn more, visit www.mgeups.com/us.
Generac Announces 'QT' Series of Commercial Standby Generators
Generac Power Systems' new 'QT' Series standby generators, ranging in output from 15 to 150 kilowatts, have been designed specifically for commercial applications. All QT models feature sound attenuated enclosures to ensure quiet operation under full load. Interior cooling fans and air passageways are designed for maximum cooling effectiveness and minimal noise. Generac's new Quiet-Test(TM) feature, from which the QT series takes its name, is a breakthrough in y runs at reduced engine speed when utility power is present, making the genset exceptionally quiet during its weekly self-test and exercise cycle. This patent pending feature is not available from any other manufacturer. All QT series gensets run on natural gas, making them a superior alternative to conventional diesel generators. With these gaseous-fueled products, fuel storage, spillag, spoilage and odor concerns are absent.
FCI-BURNDY ® INTRODUCES PATRIOT® PATCUT245 BATTERY ACTUATED HYDRAULIC CUTTER
FCI-BURNDY ® introduces the PATRIOT® PATCUT245CUAL-18V battery actuated hydraulic cutter for the electrical market. Compact, fast, and easy to use, the PATCUT245 incorporates the latest in battery tool technology.
Intended for copper and aluminum cable only, the PATCUT245CUAL-18V is capable of cutting up to 2.45 inches (outside diameter) of cable.
The ergonomic design allows one hand operation. Also, the PATCUT245 incorporates a specialized latch-style cutting head that allows interference-free closure for mid-span cuts, and it rotates 180 degrees to allow users to more easily get into tight areas.
The PATCUT245 comes equipped with a high impact formed carrying case, a tool retention lanyard, a battery charger and two batteries. The tool operates on 18-volt Ni/MH batteries. The PATCUT245 also features the addition of a reliable mechanical ram release that helps prevent depletion of battery power.
FCI-BURNDY offers a limited warranty on the cutter, batteries, and charger.
For additional information call (800) 346-4175 or visit the website www.fciconnect.com.
GREENLEE’ MAKES CONDUIT CUTTING EASY
The new Greenlee 8600 conduit cutter eliminates the need to debur the inside of conduit after it is cut. The 8600 is used to cut 1/2” and 3/4” EMT electrical conduit in residences, industrial plants, offices, and other commercial buildings.
The 8600 conduit cutter is used like other tubing cutters--alternately tighten the cutter wheel and turn the cutter around the conduit. When the cut is deep enough to reach the shoulder on the cutter wheel, remove the cutter and then simply snap the conduit into two pieces. Because the cutter wheel won't penetrate the conduit wall, no burr is created. The 8600 is also the perfect tool to cut conduit that already has wire installed.
The 8600 conduit cutter is made with a heavy-duty cast body for long life. The large smooth spindle knob is easy to grip and doesn't hurt your hand. The cutter wheel is also replaceable.
For more information phone (815) 397-7070 or visit the website at www.greenlee.com.
