Fluke Engineers Combine Two Tools Into One, Introduce the First True Insulation Multimeters 
Fluke Corporation has combined the capabilities of two frequently used test tools into one compact new tool – the insulation multimeter. The Fluke 1587 and 1577 Insulation Multimeters combine a 1 kV digital insulation tester with a full-featured true-rms digital multimeter in a single, compact, handheld device that weighs 1 lb. and easily fits in a toolbox or on a tool belt.
Easy to use with a simple interface, the 1587 provides insulation resistance testing up to 2 GΩ, with five output voltages ranging from 50 V to 1000 V, while the 1577 tests up to 600 MΩ of resistance with either 500 or 1000 V. A new remote test probe enables one-handed insulation testing via a trigger on the probe handle. Insulation testing is disabled if the meters are connected to a live circuit with more than 30 volts. Following testing, the meters automatically discharge all capacitive voltage from the equipment under test to help prevent accidental shocks.
For more information on the Fluke 1587 and 1577 Insulation Multimeters, visit www.fluke.com.
ICC Announces New Bezels for Hinged Doors for our 14”, 21”, & 28” Enclosures
ICC announces hinged doors with bezels for our 14”, 21”, & 28” sized residential enclosures. These bezels are made from 18 gage steel and are 1 & 1/8 th “ wide which makes them an ideal solution to cover jagged or excessive drywall cuts. They are reversible and will be mounted to the enclosures with 7 included screws. The bezels will have rounded corners and are painted a glossy white, same as the doors, giving them a clean finished appearance.
Thomas & Betts Ranger® Cord Fittings Redesigned for Easier Installation 
The Thomas & Betts Ranger Aluminum Cord and Cable Fittings are used to terminate portable cord into enclosures. The new hex gland nut is easier to grip with pliers or channel locks, helping to minimize slipping and resultant scarring of the nut. The enhanced Ranger Cord and Cable Fittings also feature a unique splined design that enables installers to use a screwdriver to tighten the fittings in restricted spaces.
All Thomas & Betts Ranger Cord and Cable Fittings have a beveled moisture- and oil-resistant synthetic rubber bushing system for exceptional sealing performance. The bushing is clearly marked with the cable range, so users can identify the correct size even after the fitting is taken out of its box. The new aluminum fittings are offered in nine sizes, from 1/2" to 1". Each fitting is fully assembled for fast and easy installation with no lost parts.
Thomas & Betts Ranger Cord and Cable fittings also are available in steel/iron and nonmetallic materials.
For more information, please visit www.tnb.com.
Extech Instruments Announces 1000A 3 Phase True RMS Power Analyzer/Datalogger 
Extech Instruments announces its new 1000A 3 Phase Power Analyzer/Datalogger Model 382090, which features 4 separate clamp-on adapters and measures current to 1000A and Voltage to 600V. In addition to True RMS Power, the Model 382090 measures Active Power (KW), Apparent Power (KVA), Reactive Power (KVAR), Power Factor, Phase Sequence, Active Power Energy (KWh), Apparent Power Energy (KVAh) and Reactive Power Energy (KVARh). It has a built-in recorder that datalogs up to 20,000 sets of measurements and manually logs up to 99 sets with programmable Start/Stop datalogging times.
Additional features include a large, backlit LCD, and a PC interface with software for three phase voltage/current Waveform display and Harmonic analysis.
The Model 382090 comes complete with 4 current clamps, 4 voltage leads with alligator clips, 8 AA batteries, software, PC interface cable and carrying case.
For further information call 781-890-7440 or visit www.extech.com.
Extech Instruments Announces New Clamp-On Ground Resistance Tester
E
xtech Instruments announces its new clamp-on ground resistance tester, Model 382357. Ideal for grounding systems in sub-stations, factories and office buildings, it can also be used to verify the resistance of cellular and communication tower grounding rods, check utility transmission systems and ground rods, and maintain electric transportation systems.
Extech’s 382357 simplifies ground resistance measurements on multiple point ground systems and can measure it down to 0.03 percent with a 0.02 maximum resolution. It features a true RMS AC Leakage current range of 0.2 mA to 15A, with a 0.001mA maximum resolution. It also has a programmable datalogger with 116 data points and a programmable hi/low alarm.
The 382357 has a 0.9 inch jaw size for large ground rods and verification resistors to confirm the accuracy of the meter. It automatically self calibrates when turned on and features electrical noise detection to prevent inaccurate readings. It also features a data hold and continuity beeper, as well as a 9999 count high contrast LCD display.
Extech’s new 382357 comes complete with a 9V battery, a resistance check plate and a carrying case.
For further information about the Extech Instruments and its products, call 781-890-7440 or visit www.extech.com.
Emerson Network Power Expands High-Density Astec Distributed Power Series
Emerson Network Power has expanded the popular Astec DS Series of high-density AC-DC distributed bulk power front-end power supplies from Astec Power (www.astecpower.com). With a +12VDC main output and a +3.3VDC standby output, the new DS650-3 model increases the available power to 650 Watts. The internally fan-cooled units have no minimum load requirements and include over-temperature protection, remote inhibit and remote sensing on the main output. An I 2C communications interface bus provides voltage and current monitoring, remote on/off, and internal fan speed control.
The new DS Series units comply with worldwide safety and performance standards and bear UL60950, NEMKO, CB Report, China CCC and CE Marks. Designed to NEBS Bell Core standards for electromagnetic susceptibility, the DS units also comply with the latest hazardous substance and lead-free requirements. The new models operate without derating over a wide temperature range from -10°C to 50°C and conform to industry Mil standards for shock and vibration. Optimized 1U and 2U Rack international supplier of power conversion solutions.
Power Solutions From Post Glover LifeLink Light Up Las Vegas During May Shows
Versa-Duct custom Voice, Data and Video (VDV) Power Columns and surface mount Raceway Systems were the highlights of exhibits from leading isolated power products manufacturer Post Glover LifeLink during the BISCI and AIA shows this May.
The company's VDC columns are the ideal solution for theaters, conference facilities and other venues, providing power and data connections for multiple voice, data, fiber optic and video applications. Custom design and construction accommodate any configuration of receptacles, switches, ground jacks, and data and communication outlets.
Entire offices can be quickly and easily connection to electrical, data and communication lines with the company's surface mount Raceway Systems. Factory pre-cut and prewired systems can be configured to any job specification. Post Gover LifeLink's Raceway Systems include power strips and poles, service pedestals, and power meters.
For durability and clean lines, both the VDV Columns and Raceway Systems are constructed of anodized aluminum. Custom color finishes can also be applied to match side decor. Floor and ceiling mount options provide users with maximum installation flexibility.
SKM Systems Analysis, Inc. released Electrical Industry's First Arc Flash Calculator
Engineers and Inspectors now have access to an affordable calculator to quickly estimate the electrical arc flash hazard level at any location in a power system. The new calculator, ArcCalc, calculates the arcing fault clearing, determines the arc fault clearing time from the protective device settings, calculates the incident energy and flash bounday, documents the PPE requirements, prints custom warning labels, energeized work permits and diagrams with input data and calculation results. It complies with NEC, NFPA 70E and IEEE requirements. ArcCalc includes a large validdated library of protective device trip characteristics to provide accurate trip times for the calcuations. The calculator also includes a comprehensive report with input data and calculated results, a custom label designer, and support for plan paper and vinyl label printers.
Wire Wagon Introduces 8-Spool Model
Wire Wagon's new model 104 holds 8 spools up to 16" in diameter, and work equally well on electrical, fire alarm and data installations. It has storage space for extra spools, materials and tools. There are no pins or axles to remove, so loading and unloading the model 104 is a breeze. It will pass through a 30" door and moves easily around the jobsite on 2 rigid casters and 2 swivel caster with brakes. See the entire line of Wire Wagon tools at www.wirewagon.com or call for more information, 1-877-889-2466.
Emerson Network Power Expands High-Density Astec Distributed Power Series
Emerson Network Power has expanded the popular Astec DS Series of high-density AC-DC distributed bulk power front-end power supplies from Astec Power (www.astecpower.com). With a +12VDC main oupton and a +3.3VDC standby output, the new DS650-3 model increases the available power to 650 Watts. The inernallay fan-cooled units have no minimum load requirements and include over-temperature protection, remore inhibit and remote sensing on the main output. An 12C communications interface bus provides voltage and current monitoring, remote on/of, and internal fan speed control.
Pass & Seymour/Legrand Introduces Hospital Grade Nightlight/Ground Fault Circuit Interrupter
Pass & Seymour/Legrand intorduces the newest product in its expanding family of innovative GFCI products. P&S has introduced the first Hospital Grade Nightlight/Ground Fault Circuit Interrupter receptacle.
The Hospital Grade Nightlight/GFCI is perfect for bathrooms and includes a sealed nightlight with Lexan lens that prevents tampering. The GFCI also features LED illumination with a 20-year life expectancy. The photcell turns the nightlight on in the dark, off in the daylight. For more informationa bout GFCI's, visit www.passandseymour.com or call 1-800-223-4185.
