New Thomas & Betts E-Z-Code ® EZL 100-Kit: All-inclusive, Easy-to-Use Wire Marking System in Deluxe Case
The new E-Z-Code ® EZL 100-Kit from Thomas & Betts features everything you need to make wire marking fast and simple. The kit includes the innovative E-Z-Code EZL100-Label Printer with dedicated one-touch hot-keys, two label cassettes, instruction manuals, an AC adaptor and six AA batteries, conveniently packaged in a rugged, hard-sided case for easy transport and storage.
The EZL 100-Label Printer enables users to instantly create labels for wire wrapping, terminal blocks, device covers, patch panels and more.
The E-Z-Code system produces quality labels that stick and last. The labels are available in either flexible nylon for curved/highly textured surfaces or permanent polyester for flat surfaces in 1/4”, 3/8”, 1/2” and 3/4” tapes. The labels are easy to read, smear-resistant and feature user-friendly crack-and-peel backings.
MGE First to Ensure Power Availability to VoIP, WLANs and IP Devices with New Power over Ethernet (POE) Midspan and UPS Solution
In its ongoing mission to bring the highest level of availability to today’s converged networks, MGE UPS SYSTEMS INC. has announced the launch of its new Power over Ethernet (PoE) midspan products (also known as power hubs). The new devices ensure continuous power to remotely connected IP telephones, wireless LANs, Bluetooth access points and IP-powered video s d wiring. By pairing the midspan with an extended run time MGE UPS, Voice over IP (VoIP) phones can realize up to five nines of reliability. Use of the combined midspan and UPS solution greatly enhances overall Quality of Service (QoS) for the entire network including remotely located resources.
AutomationDirect ® Launches Edison Fuse Line
AutomationDirect has launched the Edison line of fuse products. AutomationDirect is pleased to carry the most popular Current Limiting Class CC and the Class M Midget general purpose fuses for industrial control applications.
The Class CC current limiting fuses are available in both time-delay and fast-acting models. The CC line is recognized for NEC branch circuit protection and Type 2 coordinated applications for IEC or NEMA starters/contactors. Fuses are time-delay branch circuit rated for 600 VAC, with ampere ratings from 0.25 to 30 amps and an interrupting rating of 200,000 RMS symmetrical amps. Fuses in the Class M series have voltage ratings from 250 to 600 VAC, in ampere ratings from 0.5 to 50 amps, and an interrupting rating of 100,000 RMS amps. All fuses are standard 11/32”x 1-1/2” size.
Companion DIN rail mount fuse holders feature multiple-pole configurations, finger-safe protection, and are constructed of a self-extinguishing polyester material that is UL 94V-0 rated. Panel-mount fuse blocks are a pressure plate type with quick disconnect, and tin-plated bronze clips.
EZ-MAX ™ Relays Afford the Power of Z-Max ™ in Compact, Easy-to-Use Package
Leviton’s new EZ-MAX ™ lighting control relays offer users the power and performance of Leviton’s award-winning Z-MAX ™ lighting control relay systems in a compact, cost-efficient package that features simplified, menu-driven set-up. Offered in three ready-to-go stock cabinet versions, EZ-Max relays provide an easy, convenient way for contractors on moderately sized jobs to set up four automated relays quickly and easily.
EZ-Max relay cabinets are available with four standard 120/277V relays, four 2-pole relays or four 347V relays for Canadian installations. Each relay is capable of accepting input from momentary, maintained or toggle switches, as well as occupancy sensor, photocell, and low-voltage devices. EZ-Max relays feature Z-MAX’s exclusive circuitry that extends relay life to 10,000,000 switching cycles. Its relay cabinets also offer the astronomical clock and simplified keypad-programming features of the larger Z-MAX cabinets.
For more information, please visit www.leviton.com.
Pass & Seymour/Legrand® Expands Line of Successful Plugtail™ Wiring Devices to Include All Types of Commercial Projects
Pass & Seymour/Legrand recently expanded its line of PlugTail™ wiring devices . The PlugTail product line now includes hospital-grade, specification grade, isolated ground and decorator receptacles. PlugTail includes a factory-built termination that allows workers to install receptacles at a much faster pace.
The productivity gains PlugTail offers with faster installation will help customers meet tight deadlines, ease the labor process and help save on costly man hours. The factory wired PlugTail connector ensures consistency, allowing the added benefit of no call backs. Additionally, PlugTail allows electricians to snap the receptacle into place instead of taping exposed terminals.
FCI-BURNDY® Introduces the MOLE™ In-Line Splice/Reducer for the UNITAP™ Connector Line
FCI-BURNDY ® has expanded its Insulated Multiple Tap Connector (UNITAP™) line to include the MOLE™ In-Line Splice/Reducer. Tailored exclusively for direct burial applications, the MOLE is made with a specialized material that forms a water-tight connection and is rugged enough to withstand abrasions that may occur in direct burial situations.
FCI-BURNDY’s UNITAP products are pre-insulated connectors for line splice, reducer and tap applications. They are dual rated for copper and aluminum applications, with multiple configurations that accommodate a variety of applications. The UNITAP line is covered in clear Plasitol, eliminating the need for taping during installation, and the clear covering allows for easy inspection. All UNITAP products are pre-filled with an oxide inhibitor, and are contaminant-free due to solid end caps.
Free firmware upgrade for Fluke 430 Series Power Quality Analyzer
Fluke Corporation has announced a free firmware upgrade for its popular 430 Series Power Quality Analyzers. With Version 1.10, Fluke 430 Series owners can expand their measurement capabilities and increase the speed of using the tool.
The new capabilities provided by the upgrade include programmable ratios for metering and high voltage applications using secondary CTs and PTs. When coupled with the new Fluke i5s 5A current probes, you can easily verify revenue meters with a simple manual pulse count button.
The upgrade is available at no charge at www.fluke.com/430upgrade , and includes FlukeView Version 3.10 which is compatible with both the Fluke 434 and 43B Power Quality Analyzers.
For more information on the Fluke 430 Series Firmware Upgrade, visit www.fluke.com.
EnergyBlock Helps Builders & Remodelers Reduce Energy Loss & Mold Buildup in Residential & Commercial Properties
The EnergyBlock is a simple, inexpensive block of foam insulation, specifically molded to fit perfectly around standard electrical boxes. According to research by North Dakota State University in Fargo, EnergyBlock saves up to $50 in energy loss per year. Electricians can finish the total installation in less than 2 minutes per box and it easily meets the International Building Code for flame spread and smoke development.
EnergyBlock is sealed after rough wiring is complete so there is no chance of breaking the seal. Another unique aspect of the EnergyBlock is that it provides a solid R-10 insulation behind the outlet everytime, also reducing chance of mold forming due to moist inside air escaping and condensing on an exterior wall.
For more information, visit www.EnergyBlock.com or call (701) 320-1111.
New MEIU (MPRT Epoch Interface Unit)
The new MEIU (MPRT Epoch Interface Unit) interconnects a Megger MPRT with a Multi-Amp Epoch II or Epoch 20 unit for specialized testing capability.
The new MEIU is a very small (approximately 6” square) interconnect device which allows the Megger MPRT to control either a Multi-Amp high power Epoch II or Epoch 20 unit. Employing such a device adds high-current, high voltage-ampere output capability to the MPRT relay test set, when test requirements demand higher test current and output power.
Also, under this configuration the user employing the MPRT can operate the Epoch II or 20 unit manually using the MPRT TouchView Interface (TVI) or automatically using Megger AVTS Software.
Used with a three-channel MPRT, the MEIU interface unit also allows the user to manually control up to 3 Epoch II/20 units for special applications such as testing multi-terminal current differential relay with 6 currents.
