FCI Introduces the PATRIOT™ IN-LINE™ Tool
FCI introduces the newly designed PATRIOT™ IN-LINE™ hydraulic
crimping tool. With more crimps per charge, ergonomic design, and
a 14.4V Nickel Metal-Hydride (Ni-MH) battery, the PATRIOT IN-LINE
tool is your crimping solution.
Offering trouble-free operation, the PATRIOT IN-LINE tool incorporates
a high speed hydraulic pump generating six tons of crimping
force. The battery actuated hydraulic crimper provides a consistent,
reliable connection on a range of copper and aluminum terminals and
splices, overhead taps, full tension splices and deadends. Its high-capacity,
Ni-MH battery eliminates voltage depression, maximizing the
number of crimps per charge. The IN-LINE tools feature a 350º rotatable
head for operation in virtually any position.
The PATRIOT IN-LINE tool features interchangeable MD6 series jaws
capable of using “W” and “X” style dies in the permanent D3 crimping
groove. The IN-LINE tool’s audible “pop-off” crimp indicator provides a
consistent, reliable connection every time. The PATRIOT IN-LINE tool is
supplied with a durable high-impact formed carrying case, battery
charger and two high capacity 14.4 volt 2.6 AH batteries.
Each PATMD6-14V crimping tools use standard BURNDY™ dies
and off-the-shelf BURNDY™ connectors available worldwide, and
comes with a three year limited warranty on the tool.
For more information, visit
www.fciconnect.com
IDEAL Accelerates Cable
Installation with New Velocity™ Cable Pulling LubricantIDEAL recently introduced Velocity™, an ultra-low friction cable pulling lubricant that helps contractors achieve the fastest possible pulls in electrical, telecommunications and data applications. Utilizing the technical information gained over the years with the company’s successful ClearGlide® lubricants, IDEAL engineered Velocity to provide one of the industry’s highest “clingability” factors to yield the longest lasting, most uniform coating on all types of cable jacket materials. In independent testing, Velocity exhibited a coefficient of dynamic friction that was 25% lower than competitive lubricants, resulting in drastically increased lubricity for easier pulling with less effort. Contractors will appreciate this tension reduction, especially during long pulls, multiplebend pulls or pulls in extreme environments.
Velocity slow dries to a slippery film that maintains lubricity for several months to come. The cream colored gel is non-toxic, non-flammable and noncorrosive, plus will not stain skin or clothing. Cleanup requires just soap and water.
For more information, visit www.idealindustries.com
NEW CHT DECORATIVE
FIXTURE RELEASED BY
U.S. ARCHITECTURAL
LIGHTING
The CHT, a durable cast aluminum
fixture designed to illuminate public
plazas and walkways, is now available
from U.S. Architectural Lighting. Creatively-
styled with a brim, finial and
decorative cage, the CHT is designed
for wall or pole mounting up to 20’.
The CHT measures 33” wide by 28”
high and the entire assembly is
sealed with a continuous neoprene
gasket for weather protection.
The CHT is mounted to a wall by attaching
a factory-supplied 3” aluminum
extension and 20” aluminum
arm. The arm bracket has four stainless
steel tamper-proof set screws to
ensure stability.
The entire assembly has an electrostatically-
applied textured finish and
is offered in a range of standard colors:
dark bronze, black, white and
Custom colors can also be specified,
including dark green, golden yellow,
red, orange, blue and others.
The fixture’s spun aluminum reflector
is painted on the inside with high
gloss enamel for maximum reflectivity.
A polycarbonate globe encases a
clear, precise prismatic glass refractor
for maximum light control.
For more information, visit
www.usaltg.com
Workrite Launche Dickies FR Clothing Line
Workrite ® Uniform recently announced the launch of their Dickies
FR clothing line, a selection of popular Dickies ® pant, shirt and
jacket styles made from flame-resistant fabrics.
Workrite introduced Dickies FR at the Occupational
Safety & Health Committee
meeting, Edison Electric Institute,
Long Beach, CA.
Dickies FR marks the first
collaboration of Workrite Uniform
and Dickies, both part of
the Williamson-Dickie Manufacturing
Co. Workrite Uniform,
founded in 1973 and a Williamson-
Dickie subsidiary since 1999, will
manufacture the new line.
The initial Dickies FR line consists
of: 5-pocket jean; carpenter
jean; work shirt; and hooded duck
jacket.
Identical in pattern and fit to
longtime Dickies favorites, the inaugural
Dickies FR line features
Indura ® and Indura Ultra Soft ®
fabrics, comfortable cotton blend
and 100% cotton denim flame-resistant
fabrics made by Westex.
The Dickies FR line will include
traditional workwear features
such as the hammer loop and
tool pocket on the carpenter jean
and a hard hat-sized hood on the
duck jacket. Dickies FR is a
streamlined set of core styles
within the overall Workrite line.
Customers can select from both
product assortments.
For more information, visit
www.workrite.com
Toshiba IK-WB15AContinuing its leadership role in developing network-centric video solutions, Toshiba has launched the new IK-WB15A IP Network Camera, a cost-effective, full-featured IP camera. Designed specifically for IP network video surveillance and remote monitoring applications, it boasts a professional-grade feature set that includes crisp 1280x960 resolution based on the ?” Fuji Super CCD®, along with up to 30 frame-per-second Motion- JPEG video streaming, 2.6x optical zoom,
variable speed Pan-Tilt-Zoom (PTZ), installation simplifying Power over Ethernet (PoE), an SD card slot, and integrated two-way audio to allow communication with security personnel or to hear intruders. The IK-WB15A’s high-resolution imaging sets it at the top of its class. Detail-rich, full-frame images are captured by the latest generation of honeycomb- style Super CCD sensor with 630K pixels, more than 60% greater horizontal and vertical resolution than a traditional CCD of similar size. In addition, the integration of the Super CCD results in faster video processing, improved depth of field, higher sensitivity in low light, and a broader dynamic range. A self-contained, all-in-one solution, the IK-WB15A does not require an on-site PC for operation. Its embedded IP server empowers users to access live video from anywhere in the world via a standard web browser for real time incident response. Multiple viewers can access the same IK-WB15A video simultaneously, plus the camera has motion detection capability that will automatically record video when tripped even if the user is not watching. Pan, tilt and the 2.6X optical can also be controlled remotely via the simple-to-use network interface.
For more information, visit www.toshiba.com
Cooper Lighting Introduces New LED
Night/Chart LightsCooper Lighting introduces the Circadian Series, a new family of LED nightlights and chart/reading lights offering an energy efficient, low glare solution for aiding night-time navigation. Offered in three unique styles (MLN, MCL and MSN), the nightlights feature aesthetics, durability and low power consumption in a compact but powerful package; making them ideal for all types of applications including healthcare, hospitality, and senior living facilities, among others. Available with white, red, or amber LEDs, the long-lasting LEDs bring soft, low level illumination to small areas without disturbing sleep. Recent studies have found that these colors can complement a person’s circadian rhythm. The unique Chart Light/Nurse Reading Light (MCL) with illuminated push button control for easy access, features a powerful LED light source producing 30 lumens. Designed specifically for commercial healthcare applications, it provides the medical professional with a strong, focused, glare-free task light that will never disturb the patient.
The MCL Series is ideal in patient rooms, nurses’ stations and nurseries. The MLN Nightlight Series features a louvered faceplate design offering glare-free, even light distribution producing 15 lumens. The MSN Series features a unique scoop faceplate design, also producing glare-fee illumination for low-level lighting for night-time navigation. The powerful LED’s produce 30 lumens. Faceplate color options for the MLN and MSN Series include white, black and brushed nickel or custom colors.
The Circadian Series is designed for easy installation in standard junction boxes with 120V input. Low voltage styles utilizing 12V or 24V input are also available. The Circadian Series is UL/cUL listed and IC rated.
For more information, visit www.cooperindustries.com
New P&S Screwless Wall Plates Offer Flawless Finish
Without Removing Devices at Installation
Pass & Seymour/Legrand (P&S) announces a new addition to its line of
Screwless Wall Plates. With their sleek
beveled edges the wall plates eliminate
the need for screws, provide a flawless
finish and install quickly
and easily.
The new product line features
a 2-piece plastic subplate
that eliminates the need
to remove the electrical device
during installation. Simply
back the device screws
out slightly and snap the subplate
together around the device
screws to install the wall
plate. The cover plate maintains
the same sleek design.
The Screwless Wall Plates
are available in Decorator
one-, two-, three- and fourgang
plates. The plastic subplate
includes an alignment
guide to ensure a straight up
and down installation, and
the wall-hugging plate design
eliminates dust buildup. Colors include white, ivory, light almond, black and
grey with more options coming soon.
For more information, visit
www.passandseymour.com
New Brochure from Leviton
Highlights New Line of
Leaded Wiring DevicesLeviton Manufacturing’s new Leaded Receptacles and Switches brochure highlights the company’s complete line of 15 Amp and 20 Amp leaded receptacles and switches. Factory- installed leads make for faster installation than traditional external clamps without sacrificing performance and reliability. Leaded switches and receptacles are available in both industrial grade and hospital grade configurations in a wide range of color choices to complement virtually any environment.
Designed for high traffic areas, Leviton leaded receptacles feature device bodies constructed of impact-resistant thermoplastic, dual drive pins for sturdy assembly and large, triplewipe brass “T” contacts for superior conductivity. Each device is supplied with 6” long, #12 AWG THHN factory installed wire leads and a heavy gauge, locked-in wrap-around mounting strap.
Leviton leaded toggle switches feature large silver contacts for long service life, triple combination head steel screws, heavy gauge steel mounting strap and 6” long, # 12 AWG THHN wire leads.
For more information, visit www.leviton.com
Rexel Customers Can Recycle Lamps – AnywhereRexel’s customers can now take advantage of lamp, ballast, and battery recycling services offered through the company’s 325 locations across the U.S. By offering this new service, the electrical and datacom distributor makes it easy for any buyer of electrical and lighting equipment to do the environmentally responsible thing.
Working with Veolia Environmental Services, Rexel will offer RECYCLEPAK kits and bulk recycling services. Customers who purchase lamps and ballasts from a Rexel branch can now buy recycling services from the same place.
Veolia offers RECYCLEPAK kits, which feature prepaid packaging. The kits make it easy for anyone to recycle large or small quantities of spent lamps and ballasts. The company’s bulk recycling service is designed to handle larger quantities (pallets or truckloads) of lamps and/or ballasts, shipped on a regular basis.
For more information, visit www.rexelusa.com/locations/locations.aspx
New Multi-technology Wall Switch Sensors Pack
Advanced Features and Energy Savings Into a Slim,
Low-profile DesignWatt Stopper/Legrand introduces a new family of wall switch occupancy sensors appropriate for more applications than ever before. Multiple detection technologies allow specifiers to easily tailor switch selection to ensure optimal performance in each location.
The sensor family includes an unprecedented variety of features and options as well as a stylish new product design with a consistent look and feel across the line. Every sensor is packaged in an attractive, ultraslim decorator style device, available in five colors. To complete the updated aesthetics, the low profile sensor lenses match the color of each switch, a design nuance unique to Watt Stopper/Legrand.
Employing passive infrared, ultrasonic or Watt Stopper/Legrand’s own patented dual technology sensing, the wall switches are recommended for use in spaces including offices, conference rooms, restrooms, break rooms and storage rooms. In addition to the range of sensing options, line and low voltage switches are available to accommodate different wiring needs as well as dual relay switches to control separate loads.
Each switch is packed with a host of technological innovations designed to help engineers and building owners comply with energy codes and save energy. Additional features and control options include SmartSet™ technology, walk-through mode, auto- or manual-ON operating mode, test and presentation modes, audible alert, and light level sensing. Installation and set-up are quick and easy and zero crossing circuitry assures long product life.
For more information, visit www.wattstopper.com
Greenlee offers New Screw and
Nut drivers in New Hand Tool LineThese screw and nut drivers not only meet, but exceed ASME/ANSI specifications
Greenlee, a Textron Inc. (NYSE: TXT) company, now offers a variety of new screw and nut drivers in its line of recently launched professional hand tools. The entire new line of Greenlee’s screw and nut drivers are made with precision machined black phosphate tips and their heavy-duty construction allows for longer life. All products in the line feature a slip resistant cushion grip for extra comfort and torque. All handle ends are marked for easy identification of driver size, type, and length.
These screw and nut drivers not only meet, but exceed ASME/ANSI specifications.
Screwdrivers in the line include the heavy-duty keystone, cabinet and Phillips tip and stubby screwdrivers. There are 5- and 7-piece standard sets available and a 6-in-1 multi tool with bit sizes 3/16-inch and 1/4-inch flat-tip, #1 & #2 Phillips and 5/16-inch & 1/4-inch Hex. Heavyduty nut drivers and a 7-piece nut driver set with sizes from 3/16-inch to 1/2-inch are available. There are square-recess tip drivers ranging from #0 to #4 that are available in a 4- piece set or individually. Specialty drivers include screw-holding screwdrivers, a conduit reaming screwdriver and a scratch awl.
For more information, visit www.greenlee.com
Compact Track Fixture
Packs PunchRuud Lighting’s new Front-Loading Gimbal Ring track fixture (TRG1M02) offers powerful illumination in a contemporary, compact fixture. It features a 20W MR16 CMH lamp that produces exceptional illumination for its size. The ceramic metal halide lamp provides improved color control and lumen maintenance. With a 6” to 8” overall fixture height, it’s ideal for retail applications with discrete mounting
locations.
For more information, visit www.ruudlighting.com.
Specification Process Simplified with New Project:™ Brand
Streamlining the product research and specification process with a totally
online resource is what The Hadco Corporation is delivering with its new Project: ™ d area brand.
The first two Project: lighting products that can be found online at www.lightingbyproject.com are Project: Renegade™ and Project: Warrior™.conventional fixtures. These products can be maintained without tools, making it easy to replace lamps and electrical gear. Project: Renegade is a full cutoff luminaire with an IP65 rating – IP for ingress protection, 6 indicating the product is dust-tight, and 5 indicating it is protected from water projected from a nozzle against the enclosure from any direction. Its unobtrusive, aerodynamic, and attractive design also helps protect it from the effects of wind. Eric Haddad, vice president of commercial sales and marketing for Hadco, says Project: Renegade’s segment reflector makes it remarkably efficient and its rotatable optics turn in 90-degree increments to allow light to be precisely, yet flexibly, directed without remounting the fixture.
Project: Warrior is a family of large and small fixtures which feature floodlight and wall- mounted units of various sizes for lighting outdoor. Project: Warrior fixtures have 90-degree rotatable reflectors and do not require tools for routine maintenance. Additionally, they are available in different arm styles for accommodating design needs and mounting functions.
For more information, visit www.hadco.com or www.lightingbyproject.com
A New Dawn for Motion Sensor Security Lighting – Crescent/Stonco Introduces NyteWatchTM
Crescent/Stonco, a division of the Genlyte Group, Inc. recently
announced the introduction of its NyteWatch™ low-glare, motion
sensor luminaires.
As the next generation of motion sensor security lighting systems, NyteWatch twin 150
watt quartz illumination provides special computer designed cut-off optics that reduces
glare, the most common annoyance with outdoor lighting. Ideal for commercial or residential
applications, NyteWatch meets Dark Sky requirements, preserving
the nighttime environment by placing light where it is needed – no light
can be seen above 90 degrees of the fixture.
Additionally, Nytewatch enhances safety by using SteinelTM motion
sensitivity technology. With two precision sensors each covering
120 degrees, its adjustable masks are designed to customize
detection zones. The luminaire is also energy efficient, utilizing an
exclusive Nyte-Glow™ dimming feature to offer an extra layer of
safety and security for dusk-to-dawn operation. It provides constant 30% ambient lighting
then switches to full power when motion is detected.
Two models are offered in the NyteWatch product line, the NBA and the NBC. The NBA model is adjustable from 0-
30 degrees and the NBC is fixed at 0 degrees to meet Dark Sky requirements. Both models come in either black or
white with two 150 watt quartz halogen lamps included.
For more information, visit
www.exceline.com or www.genlytesupplydivision.com
West Industries Announces New Product Release: LaserLine™Precision Line Installation Tool for all types of low voltage installations
LaserLineTM was designed to fulfill the need for a more productive and improved method for the installation process of low-voltage conductors and communication cables. Equipped with a laser sighting device, LaserLineTM will accurately install a pull line up to 120 feet in just seconds through most web trusses, across suspending ceiling systems, over hard to move objects, under sub flooring or in any limited access areas like those found in most offices and commercial building structures.
This product creates efficiencies by saving time and labor as well as allowing the installer to span a much greater distances than using traditional makeshift methods. In addition, use of LaserLineTM may significantly reduce the risk of being exposed to a ladder related accident.
For more information, visit www.thelaserline.com
